Sensata Technologies Holding plc

Vertical Aerospace Appoints Defence Technology Pioneer and Former FLIR CEO Andrew Teich to Its Board of Directors

Vertical Aerospace appointed Andrew Teich, former FLIR Systems President and CEO, to its Board of Directors effective immediately. Teich brings over 40 years of defence technology experience, including growing FLIR from roughly $60 million to more than $6 billion in market value, along with expertise in U.S. Department of War programmes, advanced sensing, AI, autonomous systems and UAV technologies directly relevant to Vertical's defence and dual-use applications. This is the fourth senior aerospace and defence appointment in recent weeks, joining Chair Fabrice Brégier and directors Clyde Woltman and Marc Fontaine, as Vertical advances Valo towards certification and pursues a strategic alternatives review with Jefferies as advisor.

•6d ago

Sensata Technologies Reports Third Quarter 2026 Financial Results

Sensata reported Q3 2026 revenue of $1,003.6 million, up 7.7% year-over-year (6.8% organic), and adjusted EPS of $1.13, up 27% from $0.89 a year ago. Results included a one-time $24.0 million customer termination payment tied to a cancelled EV program; excluding it, revenue was $979.6 million and adjusted EPS $0.97. Free cash flow reached $198.3 million (119% conversion) and net leverage fell to 2.1x after the company retired ~$406 million of debt year-to-date. Management guided Q4 2026 to revenue of $942-$972 million (3%-6% YoY) and adjusted EPS of $0.95-$0.99 (8%-13% YoY), inclusive of tariff cost recovery.

•12d ago

Sensata Technologies Introduces Ultrasonic Flow Sensors Designed for AI-Driven Data Center Cooling Systems

Sensata Technologies launched its FL Series Ultrasonic Flow Sensors for liquid cooling in AI-driven data centers, supporting flow rates up to 400 liters per minute. The non-intrusive, IP65-rated sensors offer ±1% of full scale accuracy and target coolant distribution units, chillers, and HVAC systems in primary and secondary cooling loops. The launch deepens Sensata's grid-to-chip data center portfolio across thermal management, electrical protection, and power management, though no revenue or order figures were disclosed.

•17d ago

Sensata Technologies Enhances Diesel Emissions Monitoring with New ePM Particulate Matter Sensor

Sensata Technologies introduced its ePM electrostatic particulate matter sensor for real-time diesel emissions monitoring across light-, medium- and heavy-duty vehicle applications. The sensor detects particulate matter concentrations as low as 10 mg/mi and is positioned downstream of the diesel particulate filter to support onboard diagnostics and OEM emissions compliance. The launch positions Sensata to benefit from tightening monitoring thresholds, including those established by CARB, though no customer wins or revenue figures were disclosed.

•19d ago

Sensata Technologies Announces Brake Force Sensors Enabling Next-Generation Electromechanical Braking Systems in Production EVs

Sensata Technologies announced its Brake Force sensors are now enabling electromechanical braking (EMB) systems in production electric vehicles. The sensor directly measures clamping force within the brake caliper, enabling closed-loop brake-by-wire control at each wheel and building on Sensata's MSG technology proven for over 25 years. The release positions Sensata to benefit as OEMs shift from hydraulic to brake-by-wire architectures, though no revenue figures, customer names, or volumes were disclosed.

•25d ago

Sensata Technologies Introduces OmniNode™, an Off-the-Shelf High-Voltage Power Distribution Solution for Commercial Vehicles

Sensata Technologies introduced OmniNode, a patent-pending, off-the-shelf power distribution platform that consolidates high-voltage switching, protection, sensing, diagnostics, communications and charging into a single system for commercial vehicles. The product targets battery electric on- and off-road commercial vehicles, including Class 5 and above trucks and buses, where OEMs face rising complexity, cost and scalability challenges in high-voltage architecture. Built from Sensata's existing portfolio of contactors, fuses and current sensors, the platform aims to shorten OEM development timelines and support scalable electrification programs. The launch advances Sensata's shift toward system-level solutions, but no customers, orders, or revenue figures were disclosed, leaving near-term financial impact uncertain.

•2mo ago

Sensata Technologies Launches R290 Pressure + Temperature Sensor to Enable Adoption of Low-GWP and PFAS-free Refrigerants in EV Thermal Management Systems

Sensata Technologies launched its R290 Pressure + Temperature (P+T) sensor, designed to enable automotive OEMs to adopt propane (R290) refrigerant in electrified vehicle thermal management systems. R290 is gaining OEM interest as a low-GWP, PFAS-free refrigerant, but its flammability and strict leakage requirements create new design demands for accurate pressure and temperature sensing. The sensor targets BEVs, PHEVs and other electrified platforms, offering Analog and LIN output options; no customer commitments, volumes, or revenue figures were disclosed.

•2mo ago

Sensata Technologies Reports Second Quarter 2026 Financial Results

Sensata Technologies reported Q2 revenue of $990.6 million, up 5.0% year-over-year, with adjusted earnings per share rising 12.6% to $0.98. Operating performance strengthened significantly, with operating income up 19.8% and free cash flow increasing 61% to $186.4 million, representing 130% conversion of adjusted net income. The company returned $17.5 million to shareholders via dividends and completed a $400 million tender offer to retire $406 million of long-term debt; guidance for Q3 projects revenue of $957-$987 million and adjusted EPS of $0.93-$0.97.

•3mo ago

Sensata Technologies Board Approves Q3 2026 Dividend of $0.12 per share

Sensata Technologies' board approved a quarterly dividend of $0.12 per share for the third quarter of 2026. The dividend will be paid on August 26, 2026, to shareholders of record as of August 12, 2026. This represents a standard capital return activity consistent with the company's industrial technology operations.

•3mo ago

Sensata Technologies Expands Aerospace Motors Portfolio to Address Next-Generation Flight Control and Propulsion Applications

Sensata Technologies is expanding its aerospace motors portfolio into flight control actuation and propulsion applications, leveraging its existing BEI Kimco motor expertise. The new application-specific Brushless DC Motor technology targets higher-value, mission-critical environments with a focus on SWaP-C optimization and aerospace-grade manufacturing hubs in the U.S. and Mexico. The company is showcasing these high-power density solutions at the Farnborough Airshow 2026 to support customer demands for electrification and autonomy.

•3mo ago

Sensata Technologies Introduces Active + Passive PyroFuse to Advance High-Voltage Safety

Sensata Technologies introduced its Active + Passive PyroFuse (STPS500P Series), a high-voltage protection device that combines system-triggered and current-driven interruption for electrified systems. The new device offers millisecond-level response and redundancy, designed to help OEMs simplify architectures and reduce system costs in electric vehicles and industrial applications. This launch complements Sensata's existing portfolio of high-voltage contactors and sensing technologies.

•4mo ago

Sensata Technologies Reports First Quarter 2026 Financial Results

Sensata Technologies reported Q1 2026 revenue of $934.8 million, up 2.6% year-over-year, with adjusted EPS rising 10.3% to $0.86, driven by margin expansion and operational discipline. The company generated $104.6 million in free cash flow and returned $42.6 million to shareholders through dividends and buybacks, ending the quarter with $635.1 million in cash. For the second quarter, Sensata expects revenue of $950 to $980 million and adjusted EPS of $0.89 to $0.95, reflecting expected tariff recovery and sustained growth momentum.

•6mo ago